Skip to product information
1 of 2

Emtron Australia

Emtron ED7M

Emtron ED7M

10.3" Motorsport Driver Display

Regular price $4,080.00 USD
Regular price Sale price $4,080.00 USD
Sale Sold out

Ex. GST / VAT

Emtron's ED7M is an advanced 7" TFT driver display and data logger with extensive connectivity and customizability.

 

Features

  • 7" inch TFT Screen – 1280 * 768 Resolution
  • Anti Glare / Scratch Resistant Optical Bonded Glass
  • 16x High Intensity RGB LEDs
  • High Speed Gigabit Ethernet 1000Mbps
  • High Speed Logging (Up to 2000Hz)
  • eMMC 64GB On-board logging memory
  • Real-Time clock for datalogging
  • 3-axis Accelerometer and 3-axis Gyroscope
  • 4x CAN Bus
  • 4x Video Input
  • Headphone LR Output
  • Mic LR Input
  • 8 x Analog External 0.0 -5.0V Inputs (see Pinout)
  • Selectable CAN 120 Ohm Termination 

 

General

Power Supply

  • Operating voltage: 7.20V to 20.0V DC
  • Operating current: 800 mA at 14.0V 50% Backlight Duty Cycle (excluding sensor and load currents)
    Reverse battery protection

 

Operating Temperature

  • Max operating range: -30 to 85°C (-22 to 230°F)

 

Physical

  • Aluminium 6061 grade CNC billet enclosure
  • Connector system: 55 Pin Circular Mil Spec Series III Connector
  • Pin diameter: 1 mm
  • Current rating: maximum 5.0A per pin at 22AWG
  • Internal: Specification of the SoM
  • NXP® i.MX 8M Plus Quad Core
  • 4 x Arm Cortex A-53
  • 1 x Arm Cortex-M7 CPU 1.8GHz Core
  • Arm Cortex M4 170MHz Microcontroller
  • eMMC 32GB + 32GB external = 64GB total storage
  • Gigabit Ethernet
  • On-Board 6-axis IMU with 3-axis accelerometer and 3-axis gyroscope

 

Inputs

Analog Audio

  • High quality 24-bit stereo audio codec with built-in stereo headphone amplifier
  • Left and Right Mic Inputs
  • Left and Right Speaker Outputs

 

Analog Inputs

8x Analog Voltage Inputs

  • Accepts a 0.0 - 5.0V Analog input. Resolution is 1.22mV (12-Bit)
  • Selectable 1k Ohm pull-up resistor to 5V Sensor Supply on ANV1 – ANV4
  • Selectable Range control on ANV5 – ANV8; 0.0- 5.0V or 0.0 - 15.6V
  • Input Impedance 100k Ohms to ground
  • Sample Rate 2000Hz

 

Frequency Inputs

4x Frequency Inputs

  • Tolerant of inputs signals -50.0V to 50.0V
  • Accepts Magnetic and Hall effect signals.
  • User adjustable trigger thresholds from -10.0V to 10.0V with 0.25V built in hysteresis.
  • Range 0.1Hz up to 20,000.0Hz, Resolution. 0.1Hz
  • Input Impedance 100k Ohms to ground
  • Selectable 4k7 Ohm pull-up resistor to 8.5V

 

Analog Video Inputs

  • 4x Composite Inputs OR 2x S-Video Inputs
  • Accepts Analog baseband video signals.

 

Communications
  • 1x High Speed Gigabit Ethernet 1000Mbps IPv6
  • Auto IP Config
  • 4x CAN 2.0B
  • ESD Protection
  • Selectable 120 Ohm Termination Resistors
  • 1 x RS232
  • 1 x Lin Bus
  • 1 x USB C
  • 1 x Wi-Fi IEEE 802.11 ac/a/b/g/n Dual-Band (2.4/5 GHz)
  • 1 x Bluetooth 5/BLE

 

Electrical

1x 14V Supply Input

  • 5.0A Max (pin limited)
  • 7.2V - 20.0V Range
  • Supplies Device power

1x Backup Supply Input

  • 5.0A Max (pin limited)
  • 7.2V - 20.0V Range
  • Supplies device power during shutdown

3x 5.0V Sensor Supply

  • 5V Sensor Supply, Output current 400mA
  • Accuracy: +/- 0.8% at 25 °C
  • Short circuit, Reverse Battery Protection, Thermal overload protection
  • Operating temperature range -40°C ~ 85°C

1x 12.0V Regulated Output

  • 12V Regulated Supply, Output current 700mA
  • Accuracy: +/- 1.0% at 25 °C
  • Short circuit, Reverse Battery Protection, Thermal overload protection
  • Operating temperature range -40°C ~ 85°C

1x Main Ground

  • 5.0 A pin Limited

2x Analog Input 0V Reference

  • Analog Sensor 0V Reference with short to battery protection

1x Speed 0V Reference

  • Speed Sensor 0V Reference with short to battery protection
View full details